A one-screen radio control panel that works through flrig, so WSJT-X, JS8Call, fldigi and your other digital apps keep sharing the radio. RigPanel never opens the radio's COM port. Works with any radio flrig supports; full controls are built in for the Icom IC-7300 and Yaesu FT-891.
Version 1.4.4 - Windows 10/11 and Linux (Mint 21 / Ubuntu 22.04 or newer, Debian 12). Tested with flrig 2.0.09 and 2.0.12.
Download: Releases page
- Click-a-digit tuning, bands, VFO A / B, A⇄B, A=B, split, RIT / CLAR, stored frequencies (green = Data, blue = Voice, red = CW).
- Voice | Data | CW in one row: each remembers its own width, levels, receive filters and frequency per band, and runs your Rig Setting of the same name (mode, width, menus) in one click.
- Rig Settings: one-click groups of radio settings, including every menu item of both radios (Edit Rig Settings: Common | All Menus, Read from radio, one Save). ANTENNA buttons for tuner selection. IC-7300: a width for each filter (Width FIL1 / FIL2 / FIL3).
- Default Settings: your last settings stay, also after a restart; the Default Settings button (RECEIVE / FILTERS) puts your Voice / Data / CW Rig Setting back at any time, and an amber note says what has changed.
- Meters S / Po / SWR / ALC, levels RF Power / Mic / RF Gain / AF Volume + MUTE, RF gain per band.
- Receive / filters: AGC, preamp, ATT, NB, NR/DNR, notch, IC-7300 FIL1/2/3, passband SHIFT, FT-891 PROC, BKIN OFF / SEMI / FULL in CW (both radios).
- VFO Scan (FT-891): runs the radio's own scan inside your license's voice segment and lists where it stopped.
- Floating Mini Meter (Shift+Z) and Mini Levels with S-meter (Shift+L), Dark / Light themes, Shift hot keys.
- Tap Ctrl (on its own) in any program to bring RigPanel forward; tap again to minimize it (see below).
- Settings save to a file, copy to another PC and restore. Program updates never touch your settings.
| Mini meter | Mini Levels |
|---|---|
![]() |
![]() |
Windows: download RigPanel_Setup_1.4.4.exe from the Releases page and run it (no Python needed). The installer isn't
code-signed: if Windows says "Windows protected your PC", click More info > Run anyway.
Linux: save RigPanel_Ver_1.4.4_Linux.tar.gz from the Releases page in your Downloads folder, open a terminal
(Ctrl+Alt+T) and paste:
F="$(ls -t ~/Downloads/RigPanel_Ver_*_Linux.tar.gz | head -n 1)"
mkdir -p ~/Applications && tar -xzf "$F" -C ~/Applications
sh ~/Applications/"$(tar -tzf "$F" | head -n 1 | cut -d/ -f1)"/linux_install.sh
It installs into ~/Applications/RigPanel Ver 1.4.4 with a menu entry and a desktop icon. The same lines update
it. The ready-made Linux package runs on Linux Mint 21 / Ubuntu 22.04 or newer on 64-bit PCs; on anything else
(older Linux, Raspberry Pi) run from source (below). Prefer one file? RigPanel-x86_64.AppImage on the Releases page
runs without installing (make it executable, then double-click). Details:
docs/RigPanel-Linux-Install.pdf.
Guides: User Guide · Quick Start · Linux install.
| Radio | What you get |
|---|---|
| IC-7300, FT-891 | Everything: receive filters, every menu item in Rig Settings, VFO Scan (FT-891) |
| Other Icom / Yaesu (IC-705, IC-7100, IC-7610, FT-710, FT-991A...) | Add it in Settings ▾ > Add my radio: it appears in the Rig list and gets the controls most of that brand share (AGC, preamp, ATT, NB, NR, notch, BKIN, CW width) plus Rig Settings for mode / width / filters |
| Any other radio flrig supports | Frequency, mode, bandwidth, VFOs, meters, levels and TUNE through flrig. Add it as Other to give it a name in the Rig list |
Added radios are community-tested: please report what works (see Reporting problems).
Everyone uses flrig with the settings in the next section. The only difference is where the audio comes from:
| Built-in sound card | External sound card (Digirig) | |
|---|---|---|
| Radios | IC-7300, IC-705, IC-7100, IC-7610, FT-991A, FT-710... | FT-891, FT-857, FT-817, older radios without USB audio |
| Cables | One USB cable to the radio (CAT + audio) | Digirig: USB to the PC, cables to the radio's CAT and data jacks |
| flrig port | The radio's own USB serial port | The Digirig's serial port |
| Digital apps audio | The radio's USB Audio CODEC | The Digirig's audio device |
| PTT in WSJT-X / JS8Call | CAT (Rig: FLRig) | CAT (Rig: FLRig) |
RigPanel itself is set up the same way for both: it only talks to flrig.
flrig must already work with your radio. Then, in flrig > Config > Setup:
| Page | Set |
|---|---|
| Poll | Meters: S-mtr, Pwr out, SWR, ALC. Operating Controls: Freq, Mode, BW (otherwise meters and bandwidth don't follow the radio) |
| Restore | Untick everything, tick only Use xcvr data (flrig then reads the radio at start-up instead of overwriting it) |
| Server | XML-RPC server on, port 12345 |
JS8Call / WSJT-X with an FT-891: Settings > Radio: PTT CAT, Mode None, Split None.
More flrig notes: docs/FLRIG_COMPATIBILITY.md.
A quick tap of Ctrl on its own (pressed and released, no other key) in any program brings RigPanel to the front on its own monitor; another tap minimizes it. Ctrl+C, Ctrl+V and a held Ctrl do nothing. Works on Windows and on Linux with X11 (not on Wayland).
To see that tap while another program is active, RigPanel checks whether keys are up or down about 60 times a second. It never records, stores or sends which keys you press. Because a program that watches the keyboard can look suspicious, some antivirus programs may question RigPanel; you can turn the tap off in Settings ▾ > Tap Ctrl to bring RigPanel forward.
Python 3.9+ with Tk (Linux: sudo apt install python3-tk), nothing else. requirements.txt lists optional
packages for code that is still being worked on; RigPanel runs without them.
python -m rigpanel # or RigPanel.bat (Windows) / ./rigpanel.sh (Linux)
No radio? Start the practice radio first: python mock_flrig.py --rig IC-7300 (or --rig FT-891).
The release files are built by GitHub (.github/workflows/release.yml, Linux on Ubuntu 22.04) when a version
tag is made. To build yourself:
- Windows:
build_windows.bat(needs Python 3.9+ and Inno Setup 6) ->output\RigPanel_Setup_1.4.4.exe - Linux:
bash build_linux.sh(--appimagealso makes the AppImage) ->output/RigPanel_Ver_1.4.4_Linux.tar.gz. Build on the oldest Linux you want it to run on.
| Path | What |
|---|---|
rigpanel/ |
The app: core (settings, look, helpers), tables (menu tables, band plan), radios (IC-7300 / FT-891 profiles), worker (the only code that talks to flrig), widgets, waterfall, freqlist, minis, vscan (VFO Scan), extras, builder (Edit Rig Settings), app (main window) |
mock_flrig.py |
Practice radio: a stand-in flrig for testing without hardware (--real891 mimics flrig 2.0.09 + FT-891, --flrig212 flrig 2.0.12) |
tests/ |
run_all.sh: names check, whole-app regression and feature tests against the practice radio (needs a display; Xvfb on a server) |
tools/ |
Radio diagnostic scripts (read-only unless the name says write, and those put everything back) - useful for bug reports |
examples/ |
KW3KW_settings.json: a complete station (Rig Settings, frequencies, levels). Load with Settings > Load settings from a file (also on the Releases page) |
docs/ |
User Guide, Quick Start and Linux install (PDF), architecture and flrig compatibility notes |
Open an issue on the Issues page. Include the build shown at the bottom right of the window,
your radio and flrig version (flrig > Help > About), and attach rigpanel_debug.log (click the build text to open
its folder). See CONTRIBUTING.md.
GPL-3.0 - see LICENSE. Credits for other people's work: NOTICE.md. Author: KW3KW.


